China Electronics Wholesaler

How to make a photogram

A photogram is making a print in a photo lab without using a camera. By placing objects onto a piece of light sensitive paper in a darkroom, you can use an enlarger to cast light onto the paper and capture the silhouettes of the objects. Instructions Difficulty: Moderately Challenging Things You'll Need A 8 x 10 cut piece of photographic paper A dark room An enlarger or a focused light source you can turn on and off A few small objects (keys, coins, etc.) Steps 1 Step One  Click to enlarge Begin by setting your enlarger to shed an area of light that is slightly larger than the size of your 8 x 10 piece of photo paper. 2 Step Two  Click to enlarge Next, lay out your photo paper under the enlarger where the light will shine down. 3 Step Three  Click to enlarge Then arrange your objects onto the paper in any fashion. 4 Step Four  Click to enlarge Switch the enlarger on and expose the paper for approximately 5 seconds. 5 Step Five Finally, carefully remove the objects and you're ready to develop.